Shower & Tub Repair Cleveland TX, From Valve to Drain

No hot water in one shower only, a valve that will not turn, or a tub that will not drain — shower and tub problems are usually one part, found and fixed.

Serving Cleveland and our 12 service areas.

How big is the shower job?

Valve or cartridge

A mixing valve or cartridge that has failed, replaced the same visit.

  1. 1. Valve or cartridge A mixing valve or cartridge that has failed, replaced the same visit.
  2. 2. Shower or tub replacement A shower or tub that keeps failing, replaced with a new unit.
  3. 3. Drain and supply work A drain that will not clear, or a supply line behind the wall that needs repair.
  • 26Services from one local team
  • 12Areas served around Cleveland
  • Written quoteAsk for a quote first
  • LicensedRMP M-42402 — TSBPE

What a Shower and Tub Visit Covers

The valve, the drain, and the supply are checked in turn, so the right part gets fixed.

Plumber repairing a shower in a Cleveland, Texas home

Work order

Shower & Tub Repair
  • Mixing Valve Check: The shower mixing valve is tested first when one shower has no hot water, because the valve is the usual cause — not the water heater.
  • Drain Check: A tub that stands in water is checked at the strainer, the shoe, and the trap before the branch is blamed.
  • Leak Check: Leaks at the valve, the shower arm, and the tub spout are traced to the fitting behind them.
  • Pressure Check: Low pressure in one shower is traced to the valve, the head, or the supply, not assumed to be the house.
  • Repair or Replace in Writing: Repair and replacement are put side by side where both are real, can be quoted before work starts.

What the first shower and tub visit covers

First visit

We test the mixing valve, check the drain, and trace the leak before any work is quoted.

Shower and tub work at Cleveland homes

Mixing valves, drains, and leaks in showers and tubs across Cleveland homes.

  • Shower valve

    A mixing valve that will not turn, or that gives only cold water.

  • Tub drain

    A tub that stands in water, cleared at the strainer, shoe, and trap.

  • Shower leak

    A leak at the valve, the shower arm, or the tub spout.

  • Low pressure

    A shower that runs weakly, traced to the valve, the head, or the supply.

Shower repair at a Cleveland, Texas business

Shower and tub work at Cleveland businesses

A shower out of service in a business is a problem for staff and guests. The valve or drain is fixed the same visit where the part allows.

  • Gym and locker rooms

    Shower valves and drains repaired around opening hours.

  • Office showers

    A shower that runs cold or will not drain is fixed with minimal disruption.

  • Multi-unit showers

    The same shower fault across several units is checked against the shared supply.

What Shower & Tub Repair Cleveland TX Really Involves

A shower has three parts that fail: the valve, the drain, and the supply behind the wall. Telling them apart is the whole job — and the most common mistake is blaming the water heater.

Shower and tub repair in Cleveland, TX, covers the mixing valve, the drain, and the supply. The most useful fact on this page is the triage: no hot water in one shower only usually means the shower mixing valve has failed, not the water heater. If every tap is cold, the heater is the suspect — see Water Heater Repair. A tub that stands in water is usually hair and soap scum at the strainer, the shoe, or the trap; a tub that drains slowly after clearing is a branch problem, and the branch needs a camera — see Drain Cleaning. A leak at the valve or the shower arm is traced to the fitting behind the wall, and a tub that rocks or leaks at the base is checked at the drain and the seal before anything is reset.

Bathtub work sits on this page too, because a tub and a shower share the same valve, the same drain, and the same wall. A tub that will not hold water, a spout that drips, or a drain that will not clear are all diagnosed the same way: valve first, then drain, then supply. Where the shower or tub itself is damaged or keeps failing, replacement is the honest answer, and the new unit is installed, sealed, and tested before we leave. Related reading: Why Is My Water Heater Leaking From the Bottom?.

Shower valve and pipework in a Cleveland, Texas bathroom
What it is
Repair of shower mixing valves, tub drains, and shower and tub leaks.
When it helps
No hot water in one shower, a valve that will not turn, a tub that will not drain, or a leak.
What you get
The failed part fixed or the unit replaced, tested before we leave.

How a Shower and Tub Call Runs

Five steps, from the triage to a shower that runs hot and drains freely.

  1. Call and Questions

    You call (346) 687-0011 and describe the shower or tub: no hot water, a valve that will not turn, a drain that stands, or a leak. We ask whether it is one shower or the whole house.

  2. Triage the Cause

    We check whether the problem is the mixing valve, the drain, or the supply, so the right part gets fixed.

  3. Test the Valve and Drain

    The mixing valve is tested, and the drain is checked at the strainer, the shoe, and the trap.

  4. Repair or Replace

    The failed part is replaced, or the unit is replaced where the shower or tub itself is done, can be quoted before work starts.

  5. Test Hot and Drain

    The shower is run hot and cold, the tub is filled and drained, and the valve and drain are checked for leaks before we leave.

Tools We Bring to a Shower

A shower is diagnosed in order: valve, drain, then supply.

The mixing valve is tested for temperature and flow, so a cold shower is traced to the valve, not the heater.

A hand snake clears the shoe and trap where hair and soap scum have built up.

Leaks at the valve, the shower arm, and the spout are traced to the fitting behind the wall.

Low pressure in one shower is measured at the head, so the cause is found rather than guessed.

The seals, cartridges, and fittings that a shower or tub repair actually needs.

When to Call for Shower and Tub Repair

  • A homeowner in Grand Oaks Reserve has no hot water in one shower, but the rest of the house is fine.

    That is the mixing valve, not the water heater. The valve is tested and replaced the same visit.

    Homes
  • A gym has a shower that will not drain during opening hours.

    The drain is cleared at the shoe and trap, and the branch is checked if the drain is still slow.

    Businesses
  • A property manager reports a tub leaking at the drain.

    The drain and the seal are checked before the tub is reset, so the leak is fixed at the source.

    Homes and businesses
  • A homeowner wants a shower replaced during a bathroom update.

    The old unit is removed, the valve and drain are checked, and the new shower is installed, sealed, and tested.

    Homes

How Shower and Tub Work Runs in Cleveland

Shower and tub work in Cleveland is the same in every home type, with one local note: hard regional water scales valves and shower heads faster, and older homes bring ageing valves behind tiled walls. We work across Grand Oaks Reserve and Liberty Estates, and the other Cleveland areas listed on this page.

  • Grand Oaks Reserve

    New-build homes where a shower problem is usually a single failed mixing valve or cartridge.

  • Downtown Cleveland

    Older homes where a shower valve may sit behind a tiled wall that has not been opened in decades.

  • Liberty Estates

    Entry-level new builds where a tub drain problem is usually hair and soap at the strainer and trap.

Homes in Cleveland, Texas, with shower and tub repairs
  • Grand Oaks Reserve
  • Downtown Cleveland
  • Liberty Estates
  • SH-105 Corridor

From problem to finished result.

Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.

Plumbing team at work in Cleveland, TexasPhoto
  • Cold Shower Fixed at the Valve

    Before: One shower ran cold while the rest of the house had hot water.

    After: The mixing valve had failed. We replaced the cartridge, and the shower ran hot again the same visit.

  • Tub Draining Again

    Before: A tub stood in water after every shower, and the strainer was packed with hair and soap.

    After: We cleared the shoe and trap, snaked the branch, and the tub drained fully before we left.

  • Shower Leak Traced

    Before: Water was staining the ceiling below a shower.

    After: The leak was at the shower arm fitting behind the wall. We repaired the fitting and the stain stopped growing.

Shower and Tub Problems We Fix in Cleveland

The shower and tub symptoms, and what usually sits behind them.

Ask about yours

  • No hot water in one shower

    The mixing valve has failed — not the water heater.

  • Tub stands in water

    Hair and soap scum at the strainer, the shoe, or the trap.

  • Leak at the valve or arm

    A fitting behind the wall, traced before anything is opened.

  • Low pressure in one shower

    The valve, the shower head, or the supply — traced in turn.

Why Shower Work Done Properly Matters

A cold shower is usually a valve, not a heater. Getting the triage right is what keeps a small job small.

Right Triage First

One cold shower is a valve problem. Every cold tap is a heater problem. We test before replacing anything.

Valve Fixed Properly

The mixing valve cartridge is replaced with the correct part, so the shower runs hot and cold as it should.

Drain Cleared at the Source

A tub drain is cleared at the strainer, shoe, and trap, not just at the surface.

Tested Before We Leave

The shower is run hot and cold, the tub is filled and drained, and the valve is checked for leaks.

What you leave with

Clear records you can keep and share.

  • What failed

    The valve, drain, or fitting that failed, in plain words.

  • What was replaced

    The part or the unit fitted, and what was checked around it.

  • Test results

    The shower run hot and cold, with the tub filled and drained.

Licensed by the Texas State Board of Plumbing Examiners

RMP M-42402

Our Responsible Master Plumber is Arnold Jay Strass Jr., Master Plumber licence M-42402, current through 06/30/2027.

Ask for a written scope

Shower and Tub Work Done by Plumbers

Shower and tub repair is done by licensed plumbers under our Responsible Master Plumber, to the International Plumbing Code (IPC), 2015 edition, as adopted by the City of Cleveland.

Plumber at work on a shower in Cleveland, Texas

Valve vs heater

One cold shower is a valve problem. Every cold tap is a heater problem.

Drain in order

Strainer, shoe, trap, then branch — checked in that order.

Leaks behind the wall

A leak at the valve or arm is traced to the fitting behind the wall before anything is opened.

Is your Cleveland area covered?

Type your ZIP code or town to check. If you are not listed, call and ask.

Cleveland ZIP codes

  • 77327
  • 77328
  • US-59 Corridor
  • SH-105 Corridor
  • SH-321 Corridor

What Cleveland Customers Say

4.7 stars from 13 Google reviews

Shower and Tub Questions We Hear

Short answers for the first few minutes. The team can cover the rest.

Still have a question?

Describe what you are seeing and we will point you to the right next step.

(346) 687-0011

Usually the shower mixing valve has failed. The valve mixes hot and cold for that shower only, so when it fails, that shower runs cold while the rest of the house stays hot. We test the valve and replace the cartridge the same visit.

Usually hair and soap scum at the strainer, the shoe, or the trap. If the tub is still slow after clearing, the branch line is the problem and needs a camera check.

Whether the problem is the mixing valve, the drain, or the supply behind the wall, and whether the shower or tub itself needs replacing. Ask us to quote the repair or the replacement in writing before work starts.

A failed valve or cartridge is a repair. A shower or tub that is damaged, or that keeps failing after repairs, is usually better replaced. We put both options side by side where both are real.

Get Shower & Tub Repair Cleveland TX Scheduled

(346) 687-0011

A shower that runs cold, a valve that will not turn, or a tub that will not drain — call (346) 687-0011.

Contact Precision Plumbing LLC

Call (346) 687-0011 to schedule shower or tub repair, or ask a question. Monday to Saturday, 7:00 AM to 5:30 PM. Sunday Closed. Tell us whether the problem is hot water, the valve, the drain, or a leak.

Call to book a visit

Phone is the fastest way to reach us during business hours. Call and tell us what is happening and where.

Call (346) 687-0011

Hours: Monday–Saturday 7:00 AM–5:30 PM, Sunday Closed. Phone is the only contact channel.

Licensed by the Texas State Board of Plumbing Examiners — RMP M-42402.

737 County Rd 3773, Cleveland, TX 77327

Call now(346) 687-0011